Standard Stock Motors / Gearmotors
DC Motors / GearmotorsAC Shaded Pole Motors / GearmotorsAC Reversible Motors / Gearmotors
Custom Motors / Gearmotors
DC Motors / GearmotorsAC Shaded Pole Motors / GearmotorsAC Reversible Motors / GearmotorsAC Induction Motors / GearmotorsSpecial FeaturesSpecial Use Motors
BLDC Motors
BLDC Motors
Universal Motors
Universal Motors
Stepper and Synchronous Motors
Series 1000Series 3000Series 6000Series 7000Stepper and Synchronous Gearmotors

CMO-1200 - DC Permanent Magnet Motor

12 Volt PMDC Motor
Compact Reversible

Construction Features Reversible
Long life, 1000 hr+
Low cost in quantity
Wide temperature range, -20 to 250 deg F
Optional low temp lube, -60 deg F
Continuous or intermittent duty
Optional varistor for electronic noise reduction
Prelubed bushings
Optional straight knurl on shaft Typical Applications:
  • Pumps
  • Espresso mixer
  • High speed applications
Motor Specifications:
  • 6 to 12 volts DC
  • 2000 to 12,000 RPM
  • 0.20 to 4.50 in-oz
  • Bidirectional
Options Optional PC boards
Optional rectifier for AC service
Optional pinion or other drive element
Optional mount plate of easy replacement Frame and Shaft Sizes:
  • Small: 27.7 mm dia/2.30 mm shaft dia.
    (1.091 in. dia./.0906 in. dia.)
  • Flat: 32.0 mm dia/2.00 mm shaft dia.
    (1.260 in. dia./.0787 in. dia.)
  • Large: 35.8 mm dia/3.17 mm shaft dia.
    (1.409 in. dia./.1248 in. dia.)


  Baseline 12 VDC Motors – Most Available from Stock
  Optional 6V, 12V Rectified AC (Full wave filtered DC)


Ident
CMO-		 Speed nl
RPM 		Speed max eff
RPM 		Torque max eff
In-oz 		Current max eff
Amp 		Size
1204 16300 12200 0.61 1.40 SM
1209 7600 6140 1.07 0.63 SM
1210 8600 6800 0.61 0.45 SM
1211 6300 5040 0.59 0.34 SM
1212 4200 3460 0.22 0.08 FL
1213 4550 3890 0.28 0.11 FL
1214 4450 3680 0.27 0.91 LG
1215 9800 8220 1.00 0.75 SM
1216 6850 5820 2.98 1.59 LG
1218 13100 11400 4.51 4.15 LG
1219 7031 5484 0.53 0.32 SM
1221 8640 7091 0.56 1.77 SM
1223 9930 7965 0.76 0.71 SM

CMO-2400 - DC Permanent Magnet Motor

24Volt PMDC Motor
Compact Reversible

Construction Features Reversible
Long life, 1000 hr+
Low cost in quantity
Wide temperature range, -20 to 250 deg F
Optional low temp lube, -60 deg F
Continuous or intermittent duty
Optional varistor for electronic noise reduction
Prelubed bushings
Optional straight knurl on shaft Typical Applications:
  • Pumps
  • Espresso mixer
  • High speed applications
Motor Specifications:
  • 6 to 24 volts DC
  • 4000 to 24,000 RPM
  • 0.50 to 7.50 in-oz
  • Bidirectional
Options Optional PC boards
Optional rectifier for AC service
Optional pinion or other drive element
Optional mount plate of easy replacement Frame and Shaft Sizes:
  • Small: 27.7 mm dia/2.30 mm shaft dia.
    (1.091 in. dia./.0906 in. dia.)
  • Large: 35.8 mm dia/3.17 mm shaft dia.
    (1.409 in. dia./.1248 in. dia.)


  Baseline 24 VDC Motors – Most Available from Stock
  Optional 12V, 24V Rectified AC (Full wave filtered DC)


Ident
CMO-		 Speed nl
RPM 		Speed max eff
RPM 		Torque max eff
In-oz 		Current max eff
Amp 		Size
2409 9974 7879 .535 0.25 SM
2411 11500 8300 .555 0.25 SM
2412 14500 10900 1.50 0.50 SM
2413 19500 14600 1.80 1.00 SM
2414 7300 6400 3.76 1.07 LG
2415 6600 5420 0.89 0.25 LG
2416 11000 8300 0.51 0.40 SM
2417 8500 7130 2.90 0.94 LG
2418 4150 3430 2.64 0.43 LG
2421 6600 5420 0.89 0.25 SM
2423 8500 7130 2.90 0.94 LG
2425 4537 3312 0.32 0.08 SM
2426 8000 6000 2.62 1.20 LG
2427 10355 7988 0.58 0.27 SM

C15 - DC Permanent Magnet Gearmotor

12 and 24 Volt DC
Torque up to 9 in-lb

Construction Features Permanent magnet motor
Die cast zinc gearbox
Powdered metal and steel spur gears
Bronze sleeve bearings
Reversible
Continuous duty
Grease Lubricated
Integral RFI/EMI Suppression on all 24-volt motors Typical Applications:
  • Vending machine locks
  • Robotics axis control
  • Valve actuators
  • Pump drives

  Stock Item Molon Part No. Torque
(in. - lb.)     (in.-oz.)		 F/LSpeed
(RPM)		 F/L
Amps		 Dimensions
"X"     "Y"
12 VOLT X C-15-1204-1M 9.2 148 4 0.17 1.662 2.945
    C-15-1206-1M 9.2 148 6 0.17 1.589 3.077
    C-15-1212-1M 9.2 148 11.5 0.52 1.589 2.872
    C-15-1216-1M 9.2 148 16 0.40 1.589 2.872
    C-15-1238-1M 9.2 148 38 1.20 1.412 2.900
                 
  X C-15-1208-1M 6.2 100 8 .20 1.589 2.872
  X C-15-1211-1M 6.2 100 11 0.22 1.412 2.900
  X C15-1222-1M 6.2 100 22 0.68 1.412 2.695
  X C15-1230-1M 6.2 100 30 0.52 1.412 2.695
  X C15-1274-1M 6.2 100 73.5 1.60 1.339 2.827
    C15-1217-1M 3.2 52 16.5 0.20 1.412 2.695
    C15-1223-1M 3.2 52 23 0.22 1.339 2.827
    C15-1247-1M 3.2 52 46.5 0.68 1.339 2.622
    C15-1263-1M 3.2 52 63 0.52 1.339 2.622
  X C15-12154-1M 3.2 52 154 1.60 1.162 2.650
                 
    C15-1235-1M 1.6 26 35 0.20 1.339 2.622
    C15-1248-1M 1.6 26 48 0.22 1.162 2.650
    C15-1297-1M 1.6 26 97 0.68 1.162 2.445
    C15-12131-1M 1.6 26 131 0.52 1.162 2.445
                 
24 VOLT X C15-2418-1M 9.2 148 17.5 0.25 1.589 2.872
  X C15-2424-1M 9.2 148 24 0.29 1.412 2.900
                 
  X C-15-2435-1M 5.5 88 35 0.28 1.412 2.695
  X C15-2449-1M 5.5 88 49 0.33 1.339 2.827
                 
  X C15-2474-1M 2.7 44 73.5 0.28 1.339 2.622
  X C15-24102-1M 2.7 44 102 0.33 1.162 2.650
                 
  X C15-24154-1M 1.4 22 154 0.28 1.162 2.445
    C15-24212-1M 1.4 22 212 0.33 1.089 2.577
For additional information, including speed/torque curves, other mounting and performance options and competitior's cross reference, consult your local Sales Representative office or our website at http://www.molon.com

C20 - DC Permanent Magnet Gearmotor

12 and 24 Volt DC
Torque up to 18 in-lb

Construction Features Permanent magnet motor
Die cast zinc gearbox
Powdered metal and steel spur gears
Bronze sleeve bearings
Reversible
Continuous duty
Grease Lubricated
Integral RFI/EMI Suppression on all 24-volt motors Typical Applications:
  • Vending machine locks
  • Robotics axis control
  • Valve actuators
  • Pump drives

  Stock Item Molon Part No. Torque
(in. - lb.)     (in.-oz.)		 F/LSpeed
(RPM)		 F/L
Amps		 Dimensions
"X"     "Y"     "Z"
12 VOLT   C20-1202-1M 18 288 1.5 0.11 1.555 3.008 1.091
  X C20-1204-1M 18 288 3.5 0.16 1.401 3.059 1.091
  X C20-1207-1M 18 288 7 0.50 1.401 2.854 1.091
    C20-1209-1M 18 288 9 0.38 1.401 2.854 1.091
  X C20-1217-1M 18 288 17 0.58 1.225 3.380 1.409
  X C20-1230-1M 18 288 30 1.00 1.225 3.380 1.409
                   
    C20-1211-1M 7.8 125 11 0.22 1.225 2.883 1.091
    C20-1223-1M 7.8 125 23 0.68 1.225 2.678 1.091
    C20-1231-1M 7.8 125 31 0.52 1.225 2.678 1.091
  X C20-1256-1M 7.8 125 56 0.85 1.056 3.211 1.409
  X C20-12108-1M 7.8 125 108 1.40 1.056 3.211 1.409
    C20-1242-1M 2.2 36 42 0.22 1.056 2.714 1.091
    C20-1286-1M 2.2 36 86 0.68 1.056 2.509 1.091
    C20-12115-1M 2.2 36 115 0.52 1.056 2.509 1.091
    C20-12210-1M 2.2 36 210 0.85 0.895 3.050 1.409
    C20-12400-1M 2.2 36 400 1.40 0.895 3.050 1.409
24 VOLT X C20-2408-1M 18 288 8 0.16 1.401 3.059 1.091
  X C20-2411-1M 18 288 11 0.24 1.401 2.854 1.091
  X C20-2438-1M 18 288 38 0.60 1.225 3.380 1.409
                   
  X C20-2424-1M 13.4 214 24 0.33 1.225 2.883 1.091
  X C20-24115-1M 13.4 214 115 1.30 1.056 3.211 1.409
                   
    C20-2436-1M 6.7 107 36 0.28 1.225 2.678 1.091
                   
    C20-2490-1M 3.8 61 90 0.33 2.714 2.827 1.091
    C20-24430-1M 3.8 61 430 1.30 0.895 3.050 1.409
                   
    C20-24135-1M 1.9 30.5 135 0.28 1.056 2.509 1.091
For additional information, including speed/torque curves, other mounting and performance options and competitior's cross reference, consult your local Sales Representative office or our website at http://www.molon.com

CHM - DC Permanent Magnet Gearmotor

12 and 24 Volt DC
Torque up to 50 in-lb

Construction Features Permanent magnet motor
Die cast zinc gearbox
Powdered metal, steel or delrin gears
Bronze sleeve bearings
Reversible
Continuous duty
Grease Lubricated
Integral RFI/EMI Suppression on all 24-volt motors Typical Applications:
  • Industrial and agricultural valve actuators

Stock Item Molon Part No. Torque
(in. - lb.)     (in.-oz.)		 F/LSpeed
(RPM)		 F/L
Amps		 Output Shaft Location Length
"L" (in.)
12 VOLT              
X CHM-1201-8M 50 800 .6 0.12 A 2.45
X CHM-1202-2M 50 800 1.3 0.45 A 2.65
X CHM-1203-2M 40 640 4 0.68 A 2.45
X CHM-1209-4M 40 640 8 0.73 A 3.17
X CHM-1212-1M 40 640 12 1.30 A 2.65
X CHM-1217-1M 25 400 16 1.40 A 2.65
X CHM-1225-1M 20 320 25 1.30 A 2.65
X CHM-1250-1M 10 160 50 1.20 B 2.65
24 VOLT              
X CHM-2401-1M 50 800 1.2 0.14 A 2.45
X CHM-2405-1M 50 800 4 0.38 A 2.45
X CHM-2409-1M 34 544 8 0.45 A 2.65
X CHM-2413-1M 24 384 12 0.42 A 2.65
X CHM-2418-3M 17 275 17 0.45 A 2.65
X CHM-2418-3M 17 275 17 0.45 A 2.65
X CHM-2425-1M 50 800 25 1.08 A 3.17
X CHM-2445-1M 28 448 47 1.08 B 3.15
For additional information, including speed/torque curves, other mounting and performance options and competitior's cross reference, consult your local Sales Representative office or our website at http://www.molon.com

CEM - DC Permanent Magnet Gearmotor

12 and 24 Volt DC
Torque up to 150 in-lb

Construction Features Permanent magnet motor
Die cast zinc gearbox
Powdered metal, steel, or delrin gears
Bronze sleeve bearings
Reversible
Continuous duty
Grease Lubricated
Integral RFI/EMI Suppression on all 24-volt motors Typical Applications:
  • Industrial and agricultural valve actuators
  • Vending machine carousel drives

Stock Item Molon Part No. Voltage F/L/ Torque (in. - lb.) F/LSpeed (RPM) F/L Amps Dimensions (in.)
"Y"-"Z"
12V - 24V    
X CEM-1201-2M 12/24 150 0.4-1 0.20 2.77 - 1.09
X CEM-1205-1M 12/24 120 5-10 1.40 3.74- 1.48
X CEM-1210-1M 12 120 11 - 2.45 3.47 - 1.41
X CEM-1225-1M 12 55 23 - 2.35 3.47 - 1.41
X CEM-1230-1M 12 43 29 - 2.35 3.47 - 1.41
  CEM-2430-1M 24 43 - 29 1.25 3.74 - 1.48
For additional information, including speed/torque curves, other mounting and performance options and competitior's cross reference, consult your local Sales Representative office or our website at http://www.molon.com

© 2012 All rights reserved. Chicago Web Design