TM - AC Induction Motor

7600, 8600 or 9600 110 - 240 Volt AC
50/60 Hz - 3", 3.4", or 3.8" diameter motor

Construction Features Permanent split capacitor motor
Thermally protected
Class B insulation
Ball bearings
Reversible
Continuous duty Options 2 or 4 pole windings
PSC, capacitor start / run, or split phase
Single phase or poly-phase
Multi-speed or synchronous speed
Class F insulation
Cooling fan & shroud
TENV or ventilated housing
Foot mount base
Hobbed rotor shaft pinion Typical Applications:
  • Variable vane pump drives
  • Belt drives
Rotor Shaft:
  • Diameter: .375in./9.525mm
  • Custom length
  • Front or rear extension

EMH - AC Induction Motor

110 - 240 Volt AC, 50/60 Hz
Torque up to 100 in-lb

Construction Features 3" TM basemotor motor
Thermally protected
Class B insulation
Ball / sleeve bearings
Reversible
Continuous duty Options 2 or 4 pole windings
PSC, capacitor start / run, or split phase
Single phase or poly-phase
Multi-speed or synchronous speed
Class F insulation
Cooling fan & shroud
TENV or ventilated housing Typical Applications:
  • Copy machines
  • Binding equipment
Output Shaft:
  • Diameter: .250in./6.350mm,
    .312in./7.9248mm or
    .375in./9.525mm
  • Custom length
  • Front extension

Carbonator Motor

110 - 240 Volt AC, 50/60 Hz
Torque up to 100 in-lb

Construction Features 29 or 33 frame size
PSC, reversible Thermally protected
Class B insulation system, UL, CSA listed
CE certified
Ball bearing rotor support
Foot mount with rubber isolation feet
Designed to mate with Procon pumps Options Custom foot mount mounting features
Custom lead terminations or cables
Custom shaft details and snout designs
Stainless steel rotor shaft
Capacitor enclosures
2 or 4 pole designs
Optional duty cycles
Class F insulation
TENV or open design Typical Applications:
  • Designed to mate with Procon pumphead

EM3R - AC Induction Motor

Reversible Gear Motors
4 to 150 RPM at 60Hz

Construction Features Heavy duty constructed gear
Open ventilated and totally enclosed, non-ventilated continuous duty
Available with automatic thermal overload protection
Motor frame diameter - 3.00"
Designed for maximum efficiency, high starting torque and long life
UL and CSA listed Typical Applications:
  • Business equipment
  • Duplicating machines
  • Appliances
  • Hospital equipment
Motor Specifications:
  • Input motor H.P. to 1/20
  • 2 pole or 4 pole, split phase, permanent split capacitor and 3-phase designs
  • 115 to 220 volts, 50-60Hz
Gear Reducer:
  • Helical first gear for quiet operation
  • Grease/oil lubricated gear reducer for extended life
  • Precision cut hardened steel wide face gears
  • Sleeve bearings standard on output shaft...
  • Needle bearings available for overhung load capability
  • Hardened heavy duty steel gear pins
  • Die cast gear case
  • Output speed range 10 to 350 RPM (other speeds available upon request)
Optional Features: Variations in output shaft, gear ratios, motor windings, and motor types available for volume users

EM5 - AC Induction Motor

110 - 240 Volt AC, 50/60 Hz
Torque up to 100 in-lb

Construction Features 3.4" TM basemotor motor
Thermally protected
Class B insulation
Low noise helical gears
Ball / sleeve bearings
Reversible
Continuous duty Options 2 or 4 pole windings
PSC, capacitor start / run, or split phase
Single phase or poly-phase
Multi-speed or synchronous speed
Class F insulation
Cooling fan & shroud
Enclosed or ventilated housing
Needle bearings Typical Applications:
  • Copy machines
  • Copy machine main drive
  • Power transmission equipment
OutputShaft:
  • Diameter: .500
  • Custom length

EM9R - AC Induction Motor

Reversible Gear Motors
4 to 150 RPM at 60Hz

Construction Features Heavy duty constructed gear
Open ventilated and totally enclosed, non-ventilated continuous duty
Available with automatic thermal overload protection
Motor frame diameter - 3.38"
Designed for maximum efficiency, high starting torque and long life
UL and CSA listed Typical Applications:
  • Hospital beds
Motor Specifications:
  • Input motor H.P. to 1/10
  • 2 pole or 4 pole, split phase, permanent split capacitor and 3-phase designs
  • 115 to 220 volts, 50-60Hz
Gear Reducer:
  • Helical first gear for quiet operation
  • Grease/oil lubricated gear reducer for extended life
  • Precision cut hardened steel wide face gears
  • Sleeve bearings standard on output shaft...
  • Needle bearings available for overhung load capability
  • Hardened heavy duty steel gear pins
  • Die cast gear case
  • Output speed range 4 to 700 RPM (other speeds available upon request)
Optional Features: Variations in output shaft, gear ratios, motor windings, and motor types available for volume users

EM10 - AC Induction Motor

110 - 240 Volt AC, 50/60 Hz
Torque up to 500 in-lb

Construction Features 3.8" TM basemotor motor
Thermally protected
Class B insulation
Low noise helical gears
Ball / needle bearings
Reversible
Continuous duty Options 2 or 4 pole windings
PSC, capacitor start / run, or split phase
Single phase or poly-phase
Multi-speed or synchronous speed
Class F insulation
Cooling fan & shroud
TENV or open design Typical Applications:
  • Heavy duty power transmission
  • Ice harvesting equipment
  • Restaurant equipment
  • Ice slush machine main drive
Output Shaft:
  • Diameter: .500in./12.700mm
  • Custom length

EM11R - AC Induction Motor

Reversible Gear Motors
4 to 150 RPM at 60Hz

Construction Features Heavy duty constructed gear
Open ventilated and totally enclosed, non-ventilated continuous duty
Available with automatic thermal overload protection
Motor frame diameter - 3.83"
Designed for maximum efficiency, high starting torque and long life
UL and CSA listed Typical Applications:
  • Business equipment
  • Duplicating machines
  • Appliances
  • Hospital equipment
Motor Specifications:
  • Input motor H.P. to 1/4
  • 2 pole or 4 pole, split phase, permanent split capacitor and 3-phase designs
  • 115 to 220 volts, 50-60Hz
Gear Reducer:
  • Grease/oil lubricated gear reducer for extended life
  • Precision cut steel wide face gears
  • Needle bearings standard on output shaft...
  • Die cast gear case
  • Output speed range 5 to 160 RPM (other speeds available upon request)
Optional Features: Variations in output shaft, gear ratios, motor windings, and motor types available for volume users

EM12R - AC Induction Motor

Reversible Gear Motors
4 to 150 RPM at 60Hz

Construction Features Heavy duty constructed gear
Open ventilated and totally enclosed, non-ventilated continuous duty
Available with automatic thermal overload protection
Motor frame diameter - 3.83"
Designed for maximum efficiency, high starting torque and long life
UL and CSA listed Typical Applications:
  • Business equipment
  • Duplicating machines
  • Appliances
  • Hospital equipment
Motor Specifications:
  • Input motor H.P. to 1/4
  • 2 pole or 4 pole, split phase, permanent split capacitor and 3-phase designs
  • 115 to 220 volts, 50-60Hz
Gear Reducer:
  • Grease/oil lubricated gear reducer for extended life
  • Precision cut steel wide face gears
  • Needle bearings standard on output shaft...
  • Die cast gear case
  • Output speed range 5 to 160 RPM (other speeds available upon request)
Optional Features: Variations in output shaft, gear ratios, motor windings, and motor types available for volume users

103 - AC Induction Motor

115 - 230 Volt AC, 50/60 Hz
Torque up to 250 in-lb

Construction Features 3.4" TM basemotor motor
PSC, reversible
Class B insulation, UL, CSA listed, CE certified
Thermally protected
Cut and heat treated steel gearing
Phenolic, helical first gears for low noise and high strength
Ball bearing motor construction Options Needle bearing/shaft support
Stainless steel shaft
Custom shaft geometries
Custom lead terminations
2 or 4 pole designs
Custom duty cycles
TENV or open design
Class F insulation Typical Applications:
  • Ice slush machine auger drive
  • Copy machine/binder machine main drive
Output Shaft:
  • Diameter: .375in./9.525mm or
    .500in./12.700mm
  • Custom front or rear extension

Model 101 - AC Induction Motor

High Torque
Heavy Duty Gear Motor

Motor Specifications:
  • Input motor rated 1/50 to 1/8 HP
  • Powered by 2 & 4 pole; capacitor start induction run, split phase, permanent split capacitor, polyphase (2 pole only), shaded pole, reluctance type synchronous motors.
  • Voltages: 6 to 220 volts, 50 or 60 Hz
  • Open ventilated, continuous duty.
  • Available with automatic inherent thermal winding protection.
  • Motor Frame: Diameter - 3"
  • Designed for maximum efficiency, high starting torque and long life.
Gear Reducer:
  • Helical first gear for low sound level application.
  • Oil sealed gear reducer for extended life.
  • Precision cut hardened steel wide face gears.
  • Sleeve or needle bearings in output shaft for overhung loads.
  • Hardened heavy duty steel gear pins and rugged zinc diecast gear case.
  • Output speed range 3 to 850 RPM.
  • Output shaft length per application.
  • This heavy duty gear reducer construction incorporates a two gear shaft design for max. life under high torque, heavy stress, and max. shock loads.
Recommended for:
  • Business Equipment
  • Duplicating Machines
  • Appliances
  • Ice Making Equipment
  • Machine Tool Equipment
  • Photographic Equipment
  • Marking Equipment

2012 All rights reserved. Chicago Web Design